[All photos by BUILD LLC]

The BUILD Case Study House was recently completed and, inside, it’s an excellent example of our Special Projects Division cabinet packages. Today’s post is a full break-down of the design and detailing of the cabinets — all with technical callouts and specs. Enjoy.

KITCHEN
This particular kitchen is a case study in and of itself. It uses just about every type of cabinet hardware available from Blum. At a recent open house, Blum brought in their age explorer suit for a full demonstration of the hardware options. You can read more about it here.

Upper Cabinets
Cabinet Face: Aluminum cladding. We found this to be less expensive than stainless steel and easier to tool. The finished look is precise, clean and compliments the adjacent woods
Cabinet Box: Nevamar high-pressure laminate on voidless Russian birch with concealed-edge, hybrid box using Wilsonart alumi-clad on face and sides with 1/4″ lip
Reveals: 1/8” between faces
Fan: Zephyr Roma Wall Europa Classics
Hardware at Single Upper:  Blum BLUMOTION
Hardware at Large Uppers: Blum Aventos HS Lift with Servo-Drive
Added Features: Under cabinet Hera LED puck lighting


Lower Cabinets
Cabinet Face: Quartersawn Anigre w/ custom milled hardwood edge banding
Cabinet Box: Nevamar high-pressure laminate on voidless Russian birch w/ custom SPD edge
Countertops: 1 1/4″ Pental Quartz (formerly Chroma)
Range/Oven: Jenn-Air 30″ gas range with convection
Backsplash: Stainless steel with non-directional finish
Pulls: SPD custom continuous stainless steel
Reveals: Typical SPD 3/8” reveals throughout, 1/8” between faces.
Hardware:  Blum Stainless Steel Intivo and Gray Intivo (a new product not yet available)
Added Features: Orgaline

Island Cabinets
Cabinet Face: Quartersawn Anigre w/ custom milled hardwood edge banding
At featured Face (outside face of island): Curly Anigre
Cabinet Box: Nevamar high-pressure laminate on voidless Russian birch w/ custom SPD edge
Countertops: 1 1/4″ Pental Quartz
Sink: Custom stainless steel by Metal Masters Northwest
Dishwasher: Jenn-Air Trifecta
Pulls: SPD custom continuous stainless steel
Reveals: Typical SPD 3/8” reveals throughout, 1/8” between faces
Hardware:  Blum Intivo and Orgaline, Servo-Drive at trash
Added Features: Orgaline, SPD trash/recycle pull-out, bar seating, floating scribe alumi-clad toe kick.

Pantry
Cabinet Face: Quartersawn Anigre w/ custom milled hardwood edge banding.
Cabinet Box: Nevamar high-pressure laminate on voidless Russian birch w/ custom SPD edge
Refrigerator: Jenn-Air 72″ counter-depth side-by-side
Reveals: Typical SPD 3/8” reveals throughout, 1/8” between faces
Hardware:  Blum Intivo
Added Features: Custom zinc face

BATHROOMS
The SPD 400 series cabinet line was used at all bathrooms. The horizontal composition maintains a clean, modern aesthetic throughout, while the wall-hung boxes offer spaciousness and easy cleaning.

Lower Level Bathroom
Cabinet Face: Quartersawn Anigre w/ custom milled hardwood edge banding.
Cabinet Box: Nevamar high-pressure laminate on voidless Russian birch w/ custom SPD edge
Countertops: 1 1/4″ Pental Quartz
Backsplash: Stainless steel with non-directional finish
Sink: Kohler Ladena undermount
Pulls: Mockett DP3 Series pull tabs
Reveals: Typical SPD 3/8” reveals throughout, 1/8” between faces
Hardware:  Blum Tandem Blumotion

Upper Level Powder Room
Cabinet Face: Quartersawn Anigre w/ custom milled hardwood edge banding
Cabinet Box: Nevamar high-pressure laminate on voidless Russian birch w/ custom SPD edge
Backsplash: Stainless steel with non-directional finish
Sink: Lacava Aquagrande
Pulls: Mockett DP3 Series pull tabs
Reveals: Typical SPD 3/8” reveals throughout, 1/8” between faces
Hardware:  Blum Intivo and Tandembox slide

Upper Level Bathroom
Cabinet Face: Quartersawn Anigre w/ custom milled hardwood edge banding
Cabinet Box: Nevamar high-pressure laminate on voidless Russian birch w/ custom SPD edge
Countertops: 1 1/4″ Pental Quartz
Sink: Kohler Ladena undermount
Backsplash: Stainless steel with non-directional finish
Pulls: Mockett DP3 Series pull tabs
Reveals: Typical SPD 3/8” reveals throughout, 1/8” between faces
Hardware:  Blum Intivo and Tandembox slide

We also want to extend a huge thanks to the following folks for their top-notch work in bringing this project together:

Aaron Freedman at Metropolitan Appliance, Luc Boileau at Herzog Glass for supplying the mirrors and shower glass, Damir Galesic at Neric Pro Build for all the tile and countertops, Jason Webber of JW Woodwork for the millwork and cabinet installation.

That’s the scoop on the full SPD cabinet package of the BUILD Case Study House.

Cheers from Team BUILD